MAXBES-D331

Rugged 10-port Gigabit Switch with 2 SFP+10Gbit ports (MAXBES)

Includes two 10Gbit SFP+ four 1Gbit SFP + four RJ45 copper

Standard MAXBES housing with DIN-Rail mount

Includes serial CLI

Wide input 8-36VDC

Fully managaebla through Web interface or Telnet

Fanless operation

Wishlist
Kategorier: ,

Beskrivelse

Technical Features

Board Key Data
Switch lookup Engine High performance lookup engine supports up to16k MAC entries
IEEE 802.3x flow control, back pressure flow control
Status LED 2 LEDs for each copper port (Link/Activity and Speed indicators)
1 LED for each SFP (Link/Activity indicators)
External Status LED All LED for remote indication are available over lockable header
Interfaces
Ports  4x 1Gbit copper, 4x 1GBit SFP, 2x 10Gbit SFP+
  Copper ports Auto crossover (Auto MDI/MDIX) support., auto polarity correction, auto negotiation
Support for 802.3az Energy Efficient Ethernet
  1Gbit SFP ports Supports all 1GBit SFP which are MSA compliant and Ethernet compatible
Support for digital diagnostics monitoring (DDM) and triple speed copper SFP
  10Gbit SFP ports (2x) Supports all 10GBit SFP+ and 1GBit SFP which are MSA compliant and Ethernet compatible
Support for direct attached cable SFP+
Management Software
MPL developed and maintains a management SW with easy to use web interface.
Management supports: • Accessible via https, Telnet, RS232 • Configuration file support
• SNMPv1, v2c and v3 support • DHCP Client
• Switch statistic • Port Based VLAN
• IEEE 802.1Q VLAN • Quality of Service
• IEEE 802.1X MAC Address Checking • IEEE 802.1D RSTP support
• Port monitoring • Firmware Update via HTTP or TFTP
• IGMPv3 support (planned) • Trunking support (planned)
Power
Input voltage 8VDC- 36VDC, Reverse polarity protection
Power consumption 15W
Environment
Storage Temperature -45°C up to +85°C (-49°F to +185°F)
Operating Temperature -20°C to +60°C (-4°F to +140°F) at full operation
optionally up to 70°C (158°F)
Relative Humidity 5% to 95% non condensing
Standard Compliance
The MAXBES is designed to meet or even exceed the most common standard Particular references are:
EMC EN 55022, EN 55024, EN 61000, MIL-STD-461E
Shock & Vibration EN 60068
Environmental & Safety EN 50155, MIL-STD-810-F, EN 60601, EN 60950
Approval List CE, IEC 60945, IACS E10
The MAXBES has been successfully tested according EN50155, MIL-STD-810-G as well as CE marking