MAGBES-221H Open Frame 8 port manageable gigabit Ethernet Switch

MAGBES-221H er en åpen ramme (open frame) 8 port styrt ethernet switch i PC/104 format factor med strøm koblinger (5-36VDC)

6Xkopper porter på 2mm lockable header å 2 x fiber porter(2 X SFP cage)

SFP Module er ikke en integrert del av modulen å trenger å bli kjøpt separert.


Varenummer: MAGBES-221H Kategorier: , , Stikkord: , , , ,


Magbes 8 port ethernet switch åpen ramme versjon.

Kompakt og robust design

Kan styres over web  interface eller Telnet

6 M12 kobber porter

2 SFP porter


Magbes-221H Tekniske Funksjoner

Board Key Data
Switch lookup Engine support up to 1024 MAC entries with automatic learning and aging
supports auto crossover (Auto MDI/MDIX)
support polarity correction
Jumbo Frame support up to 10k Byte
Status LED 2 LEDs for each copper port (Link/Activity and Speed indicators)
1 LED for each SFP (Link/Activity indicators)
6 Copper Ports With lockable headers
2 Fiber Ports Supports standard SFP Modules (Single and Multimode) at a data rate of 100Mbit and 1Gbit
Management Software
MPL developed and maintains a management SW with easy to use web interface.
 Management supports: • Port Based VLAN • IEEE 802.1Q VLAN
• Quality of Service • IEEE 802.1X MAC Address Checking
• IEEE 802.1D RSTP support • Port monitoring
• SNMP Support • Firmware Update via HTTP or TFTP
• Telnet • TLS (HTTPS)
• IGMPv3 snooping • Trunking (planned)
Input  (MAGBES-20) 5VDC – 36VDC Input range Input over 4-pin power connector
Power consumption Typically  8W  8-port versions
Storage Temperature -45°C up to +85°C (-49°F to +185°F)
Operating Temperature -20°C to +60°C (-4°F to +140°F) at full operation
Relative Humidity 5% to 95% non condensing
Standard Compliance
The MAGBES is designed to meet or even exceed the most common standard Particular references are:
EMC EN 55022, EN 55024, EN 61000, MIL-STD-461E
Shock & Vibration EN 60068
Environmental & Safety EN 50155, MIL-STD-810-F, EN 60601, EN 60950
Approval List CE, IEC 60945, IACS E10
The MAGBES family has been successfully tested according EN50155, MIL-STD-810-G as well as CE marking